Home - Mounting Options

Blind Mount Options


(Type A)Blind Mount:

Threaded rods screw into back of plaque or boss and are inserted into cement-filled holes.

Drilled & Tapped
Welded Bosses
Picture of Welded Boss
Drilled & Tapped
Welded Bosses
Actual image of welded boss


Through Hole Mount Options

Solid Wall Mount
Hollow Wall Mount
Wood Wall Mount

(Type B) Solid Wall Mount:

Machine screws through optional rosettes into cement-filled holes. Lead shields available for masonry.

(Type C) Hollow Wall Mount:

Installation using toggle bolts with optional rosettes for hollow or drywall mount.

(Type D) Wood Mount:

Installation into wood surfaces using wood screws and optional rosettes.


Rosettes (Optional):

Rosettes are decorative covers for bronze and aluminum plaques used to cover the screw heads in each corner (included in price). Rosettes are available in 1/2", 3/4", 1" and 1-1/2" diameters. Rosettes with highlights are oxidized, aluminum rosettes are painted to match plaque background. Screw heads are painted to match plaque background.

R1 rosette
R2 rosette
R3 rosette
R4 rosette
R5 rosette
R6 rosette
R7 rosette
1/2", 3/4"
1" & 1-1/2"
1/2", 3/4"
1" & 1-1/2"
1/2", 3/4"
1" & 1-1/2"
1" & 1-1/2"
1/2", 3/4"
1" & 1-1/2"
1/2", 3/4"
1" & 1-1/2"
1" & 1-1/2"


Stake & Post Mount Options


(Type E) Garden Stake Mount:

Machine screws going through 5/16" thick black anodized stakes into back of plaque. Maximum plaque size is 12" x 8" for 1 stake or 20" x 8" for 2 stakes.


Stake Mount  

(Type F) Post Mount:

Black painted aluminum brackets attach to back of plaque with machine screws. Aluminum square post bolts into bracket at a 45º or 90º angle. Plaques over 24" wide require 2 posts.

Post Mount